Cisco Systems InfiniBand SFS 7000 Guía de inicio rápido descargar pdf (Pagina 23)

Topspin 120 Quick Start

The following sections appear in this chapter:

• “Prepare the Site” on page 1

• “Mount the Chassis in a Rack” on page 1

• “Configure Basic Connectivity” on page 6

• “Configure and Connect InfiniBand Hosts” on page 7

Prepare the Site

Read the cautionary statements in “Safety Information” on page v.

Ground yourself using an approved ground wrist-strap.

Make sure you have the right cables and sufficient ventilation.

Unpack the Topspin 120 package.

Prepare a management workstation, such as a PC running a terminal program, and a straight-through

M/F DB-9 serial cable (included).

Mount the Chassis in a Rack

This section describes how to install the Topspin 120 chassis in an equipment rack.

Requirements

In addition to the accessories provided with the switch, you should have the following:

• A #1 Phillips screw driver

• 12 screws (provided)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 36 37

Sin comentarios

Cisco Systems InfiniBand SFS 7000 Guía de inicio rápido Pagina 23