Cisco Systems PA-POS-1OC3 Guía de usuario Pagina 69

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 90
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 68
4-5
PA-POS-1OC3 Single-Port Port Adapter Installation and Configuration Guide
OL-6514-04
Chapter 4 Configuring the PA-POS-1OC3
Configuring the Interfaces
Table 4-3 provides examples of the show interfaces pos command for the supported platforms.
Table 4-3 Examples of the show interfaces pos Command for the Supported Platforms
PLatform Command Example
Cisco 7200 VXR routers
1
show interfaces pos, followed by
slot/port (port-adapter-slot-number/
interface-port-number)
The example is for interface 0 on a port adapter
in slot 6.
Router# show interfaces pos 6/0
Pos 6/0 is administratively down, line
protocol is down
[Additional display text omitted from
this example]
Cisco 7201 router show interfaces pos, followed by
slot/port (port-adapter-slot-number/
interface-port-number)
The example is for interface 0 on a port adapter
in slot 1.
Router# show interfaces pos 1/0
Pos 1/0 is administratively down, line
protocol is down
[Additional display text omitted from
this example]
Cisco 7301 router show interfaces pos, followed by
slot/port (port-adapter-slot-number/
interface-port-number)
The example is for interface 0 on a port adapter
in slot 1.
Router# show interfaces pos 1/0
Pos 1/0 is administratively down, line
protocol is down
[Additional display text omitted from
this example]
Cisco 7304 PCI Port Adapter
Carrier Card in a Cisco 7304
router
show interfaces pos, followed by
slot/port (module-slot-number/
interface-port-number)
The example is for interface 0 on a port adapter
in a Cisco 7304 PCI Port Adapter Carrier Card
in module slot 3 of a Cisco 7304 router.
Router# show interfaces pos 3/0
Pos 3/0 is administratively down, line
protocol is down
[Additional display text omitted from
this example]
Cisco 7401ASR router show interfaces pos, followed by
slot/port (port-adapter-slot-number/
interface-port-number)
The example is for interface 0 on a port adapter
in slot 1.
Router# show interfaces pos 1/0
Pos 1/0 is administratively down, line
protocol is down
[Additional display text omitted from
this example]
Vista de pagina 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 89 90

Comentarios a estos manuales

Sin comentarios