Cisco Systems N3KC3064TFAL3 Manual de usuario Pagina 49

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 164
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 48
PurposeCommand or Action
Specifies the name of the VTP domain that you want
this device to join. The default is blank.
switch(config)# vtp domain
domain-name
Step 3
Sets the VTP version that you want to use. The default
is version 1.
switch(config)# vtp version {1 | 2}
Step 4
Specifies the ASCII filename of the IFS file system
file where the VTP configuration is stored.
switch(config)# vtp file file-name
Step 5
Specifies the password for the VTP administrative
domain.
switch(config)# vtp password
password-value
Step 6
Exits the configuration submode.switch(config)# exit
Step 7
(Optional)
Displays information about the VTP configuration on
the device, such as the version, mode, and revision
number.
switch# show vtp status
Step 8
(Optional)
Displays information about VTP advertisement
statistics on the device.
switch# show vtp counters
Step 9
(Optional)
Displays the list of VTP-enabled interfaces.
switch# show vtp interface
Step 10
(Optional)
Displays the password for the management VTP
domain.
switch# show vtp password
Step 11
(Optional)
Copies the running configuration to the startup
configuration.
switch# copy running-config
startup-config
Step 12
This example shows how to configure VTP for the device:
switch# configure terminal
switch(config)# feature vtp
switch(config)# vtp domain accounting
switch(config)# vtp version 2
switch(config)# exit
switch#
This example shows the VTP status and that the switch is capable of supporting Version 2 and that the switch
is running Version 1:
switch(config)# show vtp status
VTP Status Information
----------------------
VTP Version : 2 (capable)
Configuration Revision : 0
Maximum VLANs supported locally : 1005
Number of existing VLANs : 502
VTP Operating Mode : Transparent
VTP Domain Name :
VTP Pruning Mode : Disabled (Operationally Disabled)
VTP V2 Mode : Disabled
Cisco Nexus 3000 NX-OS Layer 2 Switching Configuration Guide, Release 5.0(3)U3(1)
OL-26590-01 35
Configuring VLANs
Configuring VTP
Vista de pagina 48
1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 163 164

Comentarios a estos manuales

Sin comentarios