4-13
Cisco IP Solution Center Integrated VPN Management Suite Security User Guide, 3.2
OL-5532-02
Chapter 4 Remote Access VPN Services
Creating Remote Access VPN Policies
Table 4-4 Split Tunneling Fields
Field Name Type Instructions
Split Tunneling
Policy
drop-down
list
Select one of the following methods for split tunneling:
• Everything – This option sends all traffic, both VPN-bound traffic and
Internet-bound traffic, through the VPN tunnel to the CPE device. If you select
Everything there are no further values enter, as shown in Figure 4-14.
• In List – This option sends only traffic matching the listed networks through the
VPN tunnel to the CPE device. The non-matching traffic is sent to the CPE
device unencrypted. If you select this option, you must click Create or Generate
and create the list of network addresses from which traffic travels through the
IPsec tunnel. All other traffic is sent to the client LAN.
• Not In List – Supported for the VPN 3000 only. This option sends all traffic to
addresses in the selected list to the client LAN and sends all other traffic through
the VPN tunnel. If you select this option, you must click Create or Generate and
create the list of network addresses.
Split Tunneling
Name
text box (Optional) If you want to use a name other than the Cisco IOS or PIX Firewall
autogenerated name for the list of network addresses for which split tunneling is
enabled, enter the name here.
Generate Generate
button
Click Generate if you want to automatically create the list of private subnets from an
existing site-to-site IPsec VPN. Since a VPN may be represented by one or more
service requests, after clicking Generate select all the service requests from which
the list of private subnets is to be extracted. When you click Generate, the Service
Request for Split Tunnel List dialog box appears as shown in Figure 4-12.
Figure 4-12 The Service Request for Split Tunnel List Page
Create Create
button
Click Create and the Subnet Address for Split Tunneling dialog box appears as
shown in Figure 4-13. Enter a subnet address for Split Tunneling and click OK.
Figure 4-13 Subnet For Split Tunneling Dialog Box
(134 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales