Cisco Systems OL-7029-01 Manual de usuario descargar pdf (Pagina 186)

2-164

Catalyst 6500 Series Switch Content Switching Module with SSL Command Reference

OL-7029-01

Chapter 2 Content Switching Module with SSL Commands

client (virtual server submode)

To restrict which clients are allowed to use the virtual server, use the client command in the SLB virtual

server configuration mode. To remove the client definition from the configuration, use the no form of

this command.

client ip-address [network-mask] [exclude]

no client ip-address [network-mask]

Syntax Description

Defaults The default for network mask is 255.255.255.255 if the network mask is not specified.

Command Modes SLB virtual server configuration submode

Command History

Usage Guidelines The network mask is applied to the source IP address of incoming connections and the result must match

the IP address before the client is allowed to use the virtual server. If exclude is not specified, the IP

address and network mask combination is allowed.

Examples This example shows how to restrict a client from using the virtual server:

Cat6k-2(config-slb-vserver)# client 10.5.2.1 exclude

Related Commands advertise (virtual server submode)

client-group (policy submode)

ip access-list standard

show module csm vserver redirect

ip-address Client’s IP address.

network-mask (Optional) Client’s IP mask.

exclude (Optional) Specifies that the IP address is disallowed.

Release Modification

CSM release 1.1(1) This command was introduced.

CSM-S release 1.1(1) This command was introduced.

1 2 ... 181 182 183 184 185 186 187 188 189 190 191 ... 341 342

Sin comentarios

Cisco Systems OL-7029-01 Manual de usuario Pagina 186