Cisco Systems QC-29 Manual de usuario descargar pdf (Pagina 15)

Configuring Modular Quality of Service Congestion Management on Cisco IOS XR Software

How to Configure QoS Congestion Management on Cisco IOS XR Software

QC-43

Cisco IOS XR Modular Quality of Service Configuration Guide

Shaping performed on incoming interfaces is done at the Layer 3 level and does not include the Layer 2

header in the rate calculation.

Restrictions

The bandwidth, priority, and shape average commands should not be configured together in the same

class.

SUMMARY STEPS

1. configure

2. policy-map policy-name

3. class class-name

4. shape average {percent value | kbps}

5. exit

6. exit

7. interface type instance

8. service-policy {input | output} policy-map

9. end

commit

10. show policy-map interface type instance [input | output]

DETAILED STEPS

Command or Action Purpose

Step 1

configure

Example:

RP/0/RP0/CPU0:router# configure

Enters global configuration mode.

Step 2

policy-map policy-name

Example:

RP/0/RP0/CPU0:router(config)# policy-map

policy1

Enters policy map configuration mode.

• Creates or modifies a policy map that can be attached to

one or more interfaces to specify a service policy.

Step 3

class class-name

Example:

RP/0/RP0/CPU0:router(config-pmap)# class class1

Enters policy map class configuration mode.

• Specifies the name of the class whose policy you want

to create or change.

Step 4

shape average {percent value | kbps}

Example:

RP/0/RP0/CPU0:router(config-pmap-c)# shape

average percent 50

Shapes traffic to the indicated bit rate according to average

rate shaping in kilobits or the interface bandwidth in

percentage.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comentarios a estos manuales

Sin comentarios

Cisco Systems QC-29 Manual de usuario Pagina 15

Comentarios a estos manuales

Relacionado con productos y manuales para Software Cisco Systems QC-29