Cisco Systems WSC4500XF16SFP Manual de usuario Pagina 126

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 194
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 125
Chapter 4 Removing and Replacing FRUs
Removing and Replacing the Power Supply
4-10
Catalyst 4500 Series Switches Installation Guide
78-14409-08
Step 12 Verify power supply operation by checking the power supply’s front-panel LEDs.
You should see the following:
The LED labeled GOOD is green.
The LED labeled FAIL is not lit.
The LED labeled FAN OK is green.
Step 13 Check the power supply and system status from the system console by entering
the show system command (Catalyst Operating System) or the show power
command (Cisco IOS). For more information on this command, refer to the
command reference publication for your switch.
Step 14 If the LEDs or the show system command (Catalyst Operating System) or the
show power command (Cisco IOS) output indicate a power problem or other
system problem, see Chapter 5, “Troubleshooting,” for more information.
Vista de pagina 125
1 2 ... 121 122 123 124 125 126 127 128 129 130 131 ... 193 194

Comentarios a estos manuales

Sin comentarios