Cisco Systems WSC2960XR48FPSI Manual de usuario descargar pdf (Pagina 47)

DETAILED STEPS

PurposeCommand or Action

Checks the VTP configuration revision number.show vtp status

Step 1

Example:

Switch# show vtp status

If the number is 0, add the switch to the VTP domain.

If the number is greater than 0, follow these sub steps:

•

Write down the domain name.

•

Write down the configuration revision number.

•

Continue with the next steps to reset the switch configuration

revision number.

Enters the global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 2

Changes the domain name from the original one displayed in Step

1 to a new name.

vtp domain domain-name

Example:

Switch(config)# vtp domain domain123

Step 3

Returns to privileged EXEC mode. The VLAN information on the

switch is updated and the configuration revision number is reset to

end

Example:

Switch(config)# end

Step 4

Verifies that the configuration revision number has been reset to 0.show vtp status

Example:

Switch# show vtp status

Step 5

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 6

Enters the original domain name on the switch

vtp domain domain-name

Example:

Switch(config)# vtp domain domain012

Step 7

Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1

OL-29440-01 33

Configuring VTP

Adding a VTP Client Switch to a VTP Domain

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 177 178

Comentarios a estos manuales

Sin comentarios

Cisco Systems WSC2960XR48FPSI Manual de usuario Pagina 47

Comentarios a estos manuales

Relacionado con productos y manuales para Los conmutadores de red Cisco Systems WSC2960XR48FPSI