Cisco Systems WSC2960XR48FPSI Manual de usuario Pagina 69
- Pagina / 178
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
DETAILED STEPS
PurposeCommand or Action
Displays the VLAN IDs being used internally by the switch. If the
VLAN ID that you want to use is an internal VLAN, the display
show vlan internal usage
Example:
Switch# show vlan internal usage
Step 1
shows the routed port that is using the VLAN ID. Enter that port
number in Step 3.
Enters global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 2
Specifies the interface ID for the routed port that is using the VLAN
ID, and enters interface configuration mode.
interface interface-id
Example:
Switch(config)# interface
Step 3
gigabitethernet1/0/3
Shuts down the port to free the internal VLAN ID.shutdown
Example:
Switch(config-if)# shutdown
Step 4
Returns to global configuration mode.exit
Example:
Switch(config-if)# exit
Step 5
Sets the VTP mode to transparent for creating extended-range VLANs.vtp mode transparent
Step 6
Example:
Switch(config)# vtp mode transparent
This step is not required for VTP version
3.
Note
Enters the new extended-range VLAN ID, and enters VLAN
configuration mode.
vlan vlan-id
Example:
Switch(config-vlan)# vlan 2000
Step 7
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29440-01 55
Configuring VLANs
How to Configure Extended-Range VLANs
- 15.0(2)EX1 1
- CONTENTS 3
- OL-29440-01 v 5
- OL-29440-01 vii 7
- OL-29440-01 ix 9
- Contents 10
- Document Conventions 11
- Timesaver 12
- Related Documentation 13
- Command Modes 15
- Table 1: Command Mode Summary 16
- Using the Help System 17
- CLI Error Messages 18
- Configuration Logging 19
- Recalling Commands 20
- 12 OL-29440-01 26
- Configuring VTP 27
- Information About VTP 28
- VTP Modes 29
- VTP Advertisements 30
- VTP Version 2 31
- VTP Version 3 31
- VTP Pruning 32
- OL-29440-01 19 33
- VTP and Switch Stacks 34
- VTP Configuration Guidelines 34
- Passwords for the VTP Domain 35
- VTP Version 36
- Default VTP Configuration 37
- How to Configure VTP 38
- Enabling the VTP Version 42
- Enabling VTP Pruning 43
- Monitoring VTP 48
- OL-29440-01 37 51
- 38 OL-29440-01 52
- Configuring VLANs 53
- Restrictions for VLANs 54
- Information About VLANs 54
- Supported VLANs 55
- VLAN Port Membership Modes 55
- Normal-Range VLAN Overview 56
- Token Ring VLANs 57
- 44 OL-29440-01 58
- OL-29440-01 45 59
- Default VLAN Configuration 60
- How to Configure VLANs 61
- Deleting a VLAN 63
- Monitoring VLANs 70
- Configuration Examples 71
- OL-29440-01 59 73
- 60 OL-29440-01 74
- Configuring VLAN Trunks 75
- Restrictions for VLAN Trunks 76
- Information About VLAN Trunks 76
- Layer 2 Interface Modes 77
- Allowed VLANs on a Trunk 78
- Load Sharing on Trunk Ports 78
- OL-29440-01 65 79
- Feature Interactions 80
- How to Configure VLAN Trunks 81
- 82 OL-29440-01 96
- 84 OL-29440-01 98
- OL-29440-01 85 99
- 86 OL-29440-01 100
- Configuring Private VLANs 100
- Private VLAN Domains 101
- Secondary VLANs 102
- Private VLANs Ports 102
- Private VLANs in Networks 103
- 90 OL-29440-01 104
- OL-29440-01 91 105
- Private VLANs and SVIs 106
- SUMMARY STEPS 107
- DETAILED STEPS 108
- Example: 113
- Monitoring Private VLANs 115
- Where to Go Next 118
- Additional References 118
- OL-29440-01 105 119
- 106 OL-29440-01 120
- Configuring VMPS 121
- Restrictions for VMPS 122
- Information About VMPS 122
- OL-29440-01 109 123
- How to Configure VMPS 124
- Before You Begin 126
- Reconfirming VLAN Memberships 127
- Changing the Retry Count 129
- Monitoring the VMPS 131
- 120 OL-29440-01 134
- Tunneling 135
- Layer 2 Protocol Tunneling 136
- OL-29440-01 123 137
- Information about Tunneling 138
- OL-29440-01 125 139
- IEEE 802.1Q Tunneling 139
- 126 OL-29440-01 140
- Native VLANs 141
- System MTU 142
- OL-29440-01 129 143
- 130 OL-29440-01 144
- OL-29440-01 131 145
- 132 OL-29440-01 146
- How to Configure Tunneling 147
- Monitoring Tunneling Status 160
- 148 OL-29440-01 162
- Configuring Voice VLANs 163
- Restrictions for Voice VLANs 164
- Information About Voice VLAN 164
- Cisco IP Phone Voice Traffic 165
- Cisco IP Phone Data Traffic 165
- 152 OL-29440-01 166
- How to Configure Voice VLAN 167
- Monitoring Voice VLAN 171
- 160 OL-29440-01 174
- OL-29440-01 IN-1 175
- IN-2 OL-29440-01 176
- OL-29440-01 IN-3 177
- IN-4 OL-29440-01 178
Relacionado con productos y manuales para Los conmutadores de red Cisco Systems WSC2960XR48FPSI
(122 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.040 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales