Cisco Systems MDS 9216 Guía de usuario descargar pdf (Pagina 7)

Send documentation comments to [email protected].

3-7

Cisco MDS 9216 Switch Hardware Installation Guide

78-16165-01

Chapter 3 Connecting the Cisco MDS 9216 Switch

Connecting to a Fibre Channel Port

Figure 3-3 Connecting to the MGMT 10/100 Ethernet Port on the Cisco MDS

9216 Switch

To connect the MGMT 10/100 Ethernet port to an external hub, switch, or router,

follow these steps:

Step 1 Connect the appropriate modular cable to the MGMT 10/100 Ethernet port:

• Use modular, RJ-45, straight-through UTP cables to connect the 10/100

management port to an Ethernet switch port or hub.

• Use a cross-over cable to connect to a router interface.

Step 2 Connect the other end of the cable to the device.

Connecting to a Fibre Channel Port

The Fibre Channel ports on the switch modules are compatible with LC-type

fiber-optic SFP transceivers and cables (see Figure 3-4 on page 3-9). You can use

the Fibre Channel ports to connect to the SAN or for in-band management. For

information about configuring the switch for inband management, refer to the

Cisco MDS 9000 Family Configuration Guide.

FAN

STATUS

FAN-MOD-2

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

STATUS

SYSTEM

RESET

CONSOLE

MGMT 10/100

MDS 9216

COM1

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

99329

MGMT 10/100

1 2 3 4 5 6 7 8 9 10 11 12

Sin comentarios

Cisco Systems MDS 9216 Guía de usuario Pagina 7