Cisco Systems IPS 4510 and IPS 4520 Manual de instalación descargar pdf (Pagina 11)

7-11

Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1

OL-24002-01

Chapter 7 Installing the IPS 4510 and IPS 4520

Memory Configurations

The IPS 4510 and IPS 4520 have up to 6 DIMM modules per CPU. DIMM population is

platform-dependent. Table 7-5 shows the memory configurations.

Power Supply Module Requirements

Table 7-6 lists the power supply module requirements.

Note The IPS 4520 requires two power supply modules.

Supported SFP/SFP+ Modules

The SFP/SFP+ module is a hot-swappable input/output device that plugs into the SFP/SFP+ ports and

provides Gigabit Ethernet connectivity. The SFP and SFP+ modules are optional and not included with

the IPS 4510 and IPS 4520. You can purchase them separately. For 1 Gb, you need SFP. For 10Gb, you

need SFP+. The interfaces are called TenGigabitEthernet 0/x whether they are 10 Gb-enabled or not.

Table 7-5 Memory Configurations

Model Memory

IPS 4510 24-GB DRAM

IPS 4520 48-GB DRAM

Table 7-6 Power Supply Module Requirements

50 V 12 V 3.3 V_STBY

Output Voltage

Maximum 52.0 V 12.2. V 3.45 V

Nominal 50.0 V 12.0 V 3.35 V

Minimum 48.0 V 11.8 V 3.25 V

Output Current @ 200 VAC

Maximum 17.3 A 27.0 A 1.5 A

Minimum 0 0 0

Output Current @ 100 VAC

Maximum 17.3 A 27.0 A 1.5 A

Minimum 0 0 0

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Sin comentarios

Cisco Systems IPS 4510 and IPS 4520 Manual de instalación Pagina 11