Cisco Systems IPS 4510 and IPS 4520 Manual de instalación descargar pdf (Pagina 24)

7-24

Cisco Intrusion Prevention System Appliance and Module Installation Guide for IPS 7.1

OL-24002-01

Chapter 7 Installing the IPS 4510 and IPS 4520

Installing and Removing the Slide Rail Kit

Step 2 Secure the slide rail to the rack post with the provided #10-32 screws by tightening the screws at the front

and rear end of the slide rail to the rack post (Figure 7-10). Both front and rear rack posts must be secured

with the screws before you install the chassis.

Caution It is critical that the screws are installed and secured to the front and rear end of the slide rails.

Figure 7-10 Securing the Slide Rail to the Rack Post

332655

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 35 36

Sin comentarios

Cisco Systems IPS 4510 and IPS 4520 Manual de instalación Pagina 24