Cisco Systems XR 12000 Series Manual de instalación descargar pdf (Pagina 75)

Cisco XR 12000 Series Router Ethernet Line Card Installation

OL-7861-01

Line Card Memory

Step 3 If there is a retaining clip, check to make sure that it has not been damaged or bent. (See Figure 54.)

Note Some line cards do not require a retaining clip.

Figure 54 SODIMM Socket Retaining Clip

Caution If the retaining clip is damaged, do not use it. This can damage the SODIMM socket.

Step 4 Locate the route memory socket on the line card.

Step 5 Remove the new SODIMM from its protective antistatic bag.

Caution Grasp the edges of the SODIMM only. Do not touch the integrated circuit devices on the SODIMM; the

metal traces, or fingers, along the edge of the SODIMM; or the pins in the SODIMM socket.

Step 6 Line up the SODIMM key with the key in the board socket. (See Figure 55.)

75757

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 83 84

Sin comentarios

Cisco Systems XR 12000 Series Manual de instalación Pagina 75