Cisco Systems 78-11180-01 Manual de usuario descargar pdf (Pagina 20)

2-20

Installation Guide for the Cisco Secure PIX Firewall Version 5.2

78-11180-01

Chapter 2 Installing a PIX Firewall

Installing a PIX 520 or Earlier Model

Figure 2-21 shows how the slots are numbered if a single-port interface card is inserted in slot 0 and a

four-port interface card is inserted in slot 1.

Figure 2-21 Single-Port Ethernet Interface Installed in Slot 0 and Four-Port Installed in Slot 1

Figure 2-22 shows how the slots are numbered if single-port interface cards are installed in slot 0 and

in slot 1 and a four-port interface card is inserted in slot 2.

Figure 2-22 Single-Port Ethernet Interface Installed in Slot 0 and 1 and Four-Port Ethernet Interface

Installed in Slot 2

Installing Interface Cables to a PIX 520 or Earlier Model

Follow these steps to install interface cables to a PIX 520 or earlier model:

Step 1 Locate the serial cable. The serial cable assembly consists of a null modem cable with RJ-45

connectors, two separate DB-9 connectors, and a separate DB-25 connector as shown in Figure 2-23.

Step 2 Install the serial cable between the PIX Firewall and your console computer.

44307

Interface 0

Interface 1

Interface 2

Interface 3

Interface 4

44308

Interface 0

Interface 1

Interface 3

Interface 4

Interface 2

Interface 5

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 37 38

Sin comentarios

Cisco Systems 78-11180-01 Manual de usuario Pagina 20