Cisco Systems C819GUK9 Manual de usuario descargar pdf (Pagina 129)

11-3

Cisco 819 Series Integrated Services Routers Software Configuration Guide

OL-23590-02

Chapter 11 Configuring PPP over Ethernet with NAT

Configuration Tasks

DETAILED STEPS

Configure the Fast Ethernet WAN Interfaces

In this scenario, the PPPoE client (your Cisco router) communicates over a 10/100 Mbps-Ethernet

interface on both the inside and the outside.

Perform these steps to configure the Fast Ethernet WAN interfaces, starting in global configuration

mode:

Command or Action Purpose

Step 1

vpdn enable

Example:

Router(config)# vpdn enable

Router(config)#

Enables VPDN on the router.

Step 2

vpdn-group name

Example:

Router(config)# vpdn-group 1

Router(config-vpdn)#

Creates and associates a VPDN group with a

customer or VPDN profile.

Step 3

request-dialin

Example:

Router(config-vpdn)# request-dialin

Router(config-vpdn-req-in)#

Creates a request-dialin VPDN su/jointfilesconvert/86654/bgroup,

indicating the dialing direction, and initiates the

tunnel.

Step 4

protocol {l2tp | pppoe}

Example:

Router(config-vpdn-req-in)# protocol pppoe

Router(config-vpdn-req-in)#

Specifies the type of sessions the VPDN su/jointfilesconvert/86654/bgroup

can establish.

Step 5

exit

Example:

Router(config-vpdn-req-in)# exit

Router(config-vpdn)#

Exits request-dialin VPDN group configuration.

Step 6

exit

Example:

Router(config-vpdn)# exit

Router(config)#

Exits VPDN configuration, returning to global

configuration mode.

1 2 ... 124 125 126 127 128 129 130 131 132 133 134 ... 195 196

Comentarios a estos manuales

Sin comentarios

Cisco Systems C819GUK9 Manual de usuario Pagina 129

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco Systems C819GUK9