Cisco Systems IC-23 Manual de usuario descargar pdf (Pagina 38)

Configuring LAN Interfaces

LAN Interface Configuration Examples

IC-60

Cisco IOS Interface Configuration Guide

Configuring PCbus Token Ring Interface Management

The Token Ring interface on the AccessPro PC card can be managed by a remote LAN manager over the

PCbus interface. Currently, the LanOptics Hub Networking Management software running on an

IBM-compatible PC is supported.

To enable LanOptics Hub Networking Management of a PCbus Token Ring interface, use the following

command in interface configuration mode:

Enabling Token Ring Concentrator Port

To enable an interface to operate as a concentrator port, use the following command in interface

configuration mode:

Monitoring and Maintaining the Port

To monitor the Token Ring Concentrator Port, use one or more of the following commands in EXEC

mode:

LAN Interface Configuration Examples

This section provides examples to illustrate configuration tasks described in this chapter. The following

examples are included:

• Ethernet Encapsulation Enablement Example

• Full Duplex Enablement Operation Example

• PA-12E/2FE Port Configuration Examples

• PA-VG100 Port Adapter Configuration Example

• Fast EtherChannel Configuration Examples

• FDDI Frames Configuration Example

• Hub Configuration Examples

• LAN Extender Enablement Interface Example

• LAN Extender Interface Access List Examples

Command Purpose

local-lnm

Enables PCbus LAN management.

Command Purpose

port

Specifies concentrator port operation.

Command Purpose

show controllers token

Displays internal state information about the Token Ring interfaces in the

system.

show interface token

Displays high-level statistics for a particular interface.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 44 45 46

Sin comentarios

Cisco Systems IC-23 Manual de usuario Pagina 38