Cisco Systems SA-ISA Manual de usuario descargar pdf (Pagina 35)

3-5

Integrated Services Adapter and Integrated Services Module Installation and Configuration

OL-3575-01 B0

Chapter 3 Removing and Installing the ISA and the ISM

ISA or ISM Removal and Installation

Cisco 7100 Series—Removing and Installing the ISM

29332

Step 1

To remove the ISM, use a number 2 Phillips screwdriver to

loosen the captive installation screws.

Step 2

Grasp the captive installation screws of the ISM to pull it from the

router.

Note: When inserting the ISM, hold the ISM up at a

slight angle to engage the carrier guides. Completely

seating the ISM in the slot may require several attempts.

Step 3

To insert the ISM, carefully align the ISM carrier between the

upper and the lower edges of the service module slot (slot 5).

Step 4

Carefully slide the ISM all the way into the slot until it is seated in

the router midplane.

Step 5

After the ISM is properly seated, tighten the captive installation

screws.

ERROR

BOOT

RESET

SM-ISM

ISM in slot 5

Captive installation screws

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 51 52

Sin comentarios

Cisco Systems SA-ISA Manual de usuario Pagina 35