Cisco Systems BEFSR41 Manual de usuario descargar pdf (Pagina 15)

Chapter 4: Connecting the Router

Connection Instructions

EtherFast Cable/DSL Router with 4-Port Switch

Connection Instructions

1. Make sure that all network devices are powered off, including the Router, PCs, switches, cable or DSL

modem, and peripherals.

2. Connect one end of an Ethernet network cable to one of the numbered ports on the back of the Router.

Connect the other end to an Ethernet port on a network device, e.g., a PC, print server, or switch.

Repeat this step to connect more PCs or other network devices to the Router.

3. Connect your cable or DSL modem’s Ethernet cable to the Router’s Internet port.

4. Power on the cable or DSL modem.

5. Connect the included power adapter to the Router’s Power port and then plug the power adapter into an

electrical outlet. The Power LED on the Router’s front panel will light up as soon as the power adapter is

connected properly.

6. Power on your PC(s).

Proceed to “Chapter 5: Configuring the Router.”

Figure 4-2: Connect a PC

Figure 4-4: Connect the Power

Figure 4-3: Connect the Cable/DSL Modem

Figure 4-1: Example of a Typical Network

PC with Ethernet Adapter

Router

Cable or DSL

Modem

Notebook with

Ethernet Adapter

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 71 72

Sin comentarios

Cisco Systems BEFSR41 Manual de usuario Pagina 15