Cisco Systems Chassis AS5350 Manual de instalación descargar pdf (Pagina 37)

3-11

Cisco AS5350 Universal Gateway Chassis Installation Guide

78-10754-03 0A

Chapter 3 Installing the Cisco AS5350

Connecting to the Console and Auxiliary Ports

• Connect a synchronous serial port to a modem or a CSU/DSU with a serial transition cable. (See

Figure 3-12.)

Figure 3-12 Connecting to a CSU/DSU

Connecting to the Console and Auxiliary Ports

Use the console terminal for local administrative access to the universal gateway. You can only connect

a terminal to the console port. You can use the auxiliary port to connect a terminal or a modem for remote

access to the universal gateway.

Connecting to the Console Port

To connect a terminal (an ASCII terminal or a PC running terminal emulation software) to the console

port on the Cisco AS5350, follow this procedure:

Step 1 Connect the terminal to the console port using an RJ-45 rollover cable and an RJ-45-to-DB-25 or

RJ-45-to-DB-9 adapter. The adapters provided are labeled TERMINAL. The adapters and the rollover

cable are included in the accessory kit that comes with the universal gateway. (See Figure 3-13.)

Note For additional information on rollover cable pinouts, see Appendix C, “Cabling Specifications.”

Step 2 Configure your terminal or PC terminal emulation software for 9600 baud, 8 data bits, no parity, and

2 stop bits.

Step 3 Configure the console port. See the Cisco AS5350 and Cisco AS5400 Universal Gateway Software

Configuration Guide. This document is available on the World Wide Web and the documentation

CD-ROM that comes with your universal gateway. (See the “Obtaining Documentation” section on

page xiii.)

35675

Serial

transition

cable

CSU/DSU or

other DCE or DTE

Synchronous serial

port (DB-26)

EIA/TIA-232, EIA/TIA-449, EIA/TIA-530A,

EIA/TIA-530, V.35, or X.21 connector

Internet

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 101 102

Sin comentarios

Cisco Systems Chassis AS5350 Manual de instalación Pagina 37