Cisco Systems D200 Manual de usuario descargar pdf (Pagina 47)

19-47

Cisco ONS 15454 SDH Procedure Guide, R7.2

October 2007

Chapter 19 DLPs D200 to D299

DLP- D243 Create a VLAN

DLP-D243 Create a VLAN

Step 1 From the View menu, choose Go to Network View.

Step 2 From the Tools menu, choose Manage VLANS.

Step 3 In the All VLANs dialog box, click Create.

Step 4 In the Define New VLAN dialog box, complete the following:

• VLAN Name—Assign an easily identifiable name to your VLAN.

• VLAN ID—Assign a VLAN ID. The VLAN ID should be the next available number between 2 and

4093 that is not already assigned to an existing VLAN. Each ONS 15454 SDH network supports a

maximum of 509 user-provisionable VLANs.

• Topology Host—Choose the node to serve as the topology host from the drop-down list. The

topology host is used to discover the VLAN topology. The login node is the default.

Step 5 Click OK.

Step 6 Click Close.

Step 7 Return to your originating procedure (NTP).

Purpose This task creates a new VLAN.

Tools/Equipment None

Prerequisite Procedures See Chapter 6, “Create Circuits and Low-Order Tunnels” for circuit

creation procedures.

Required/As Needed As needed

Onsite/Remote Onsite or remote

Security Level Provisioning or higher

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 85 86

Sin comentarios

Cisco Systems D200 Manual de usuario Pagina 47