Cisco Systems EDFA2 Manual de operaciones descargar pdf (Pagina 209)

FINAL DRAFT - CISCO CONFIDENTIAL

9-61

Cisco ONS 15216 EDFA2 Operations Guide

78-16033-01

Chapter 9 TL1 Commands

TL1 Commands and Autonomous Messages

Example 9-47 SET-ATTR-SECUDFLT Command

Amp01:ONS15216 EDFA2> SET-ATTR-SECUDFLT:Amp01::123::AL=RW,TMOUT=45;

9.7.45 SET-TH-DWDM

Command SET-TH-DWDM

Sets optical threshold values for the ONS 15216 EDFA2.

Syntax

SET-TH-DWDM:[<tid>]:<aid>:<ctag>::<thresholdtype>,<thresholdvalue>[,,];

Example 9-48 SET-TH-DWDM Command

Amp01:ONS15216 EDFA2> SET-TH-DWDM:Amp01:ALL:123::LOSTH,-1500;

Table 9-51 SET-ATTR-SECUDFLT Syntax Description

Parameter Syntax Description

al Access level for which the timeout is being set. See “Summary

of Security Permissions for TL1 Commands” section on

page 9-6 for access level permissions.

R Read only privileges.

RW Read and write privileges.

RWA Read, write, and administrative privileges.

timeout

0 - 99

Value of the timeout in minutes for the corresponding access

level. Defaults are:

R = 60 min.

RW = 30 min.

RWA = 15 min.

0 means no timeout.

Table 9-52 SET-TH-DWDM Syntax Description

Parameter Syntax Description

aid 1 and ALL have same input effect.

1 Directly affecting the optical signal.

ALL Any or all of the preceding (command input only).

1 2 ... 204 205 206 207 208 209 210 211 212 213 214 ... 279 280

Sin comentarios

Cisco Systems EDFA2 Manual de operaciones Pagina 209