
Connecting Cisco Voice Network Modules to the Network
IP Communications High-Density Digital Voice or Fax Network Module
10
Connecting Cisco Voice Network Modules to the Network
You can install up to four PVDM2 modules on all of the NM-HDV2 SKUs. The number of channels
supported depends on the number and density-type of PVDM2 modules installed.
Note PVDM and PVDM2 modules are not interchangeable. Use PVDM modules with the NM-HDV network
module only, and use PVDM2 modules with the NM-HDV2 network module only.
When used with PVDM2 modules and either the built-in T1/E1 ports or the T1/E1 voice or WAN
interface cards (VWIC), the NM-HDV2 network module provides the interface to the PBX, the PSTN,
or WAN. The following VWICs are supported:
• VWIC-1MFT-T1
• VWIC-2MFT-T1
• VWIC-2MFT-T1-DI
• VWIC-1MFT-E1
• VWIC-2MFT-E1
• VWIC-2MFT-E1-DI
• VWIC-1MFT-G703
• VWIC-2MFT-G703
When used with PVDM2 modules and next-generation analog or BRI voice interface cards (VIC2), the
NM-HDV2 network module provides the interface to telephony equipment (PBX, key systems,
telephones, and fax machines) and to the PSTN. The following VICs are supported:
• VIC-2DID
• VIC-1J1
PVDM2-32 32-channel packet fax or voice DSP module
PVDM2-48 48-channel packet fax or voice DSP module
PVDM2-64 64-channel packet fax or voice DSP module
Table 1 PVDM2 Module SKUs
Module Name Description
Table 2 Channels Per PVDM2 Module Type
Module Name
Max Channels for High
Complexity
1
1. High-complexity vocoders supported: G.711, G.726, G.729, G.723.1, G.728, and Fax Relay.
Max Channels for
Medium Complexity
2
2. Medium-complexity vocoders supported: G.711, G.726, G.729a, and Fax Relay.
Range of Channels for
Flexi Complexity
3
3. Flexi vocoders supported: G.711, G.726, G.729, G.723.1, G.728, and Fax Relay (number of channels depends on codec
selected).
PVDM2-8444-8
PVDM2-16686-16
PVDM2-32 12 16 12-32
PVDM2-48 18 24 18-48
PVDM2-64 24 32 24-64
Comentarios a estos manuales