Cisco Systems OL-15986-01 Manual de usuario descargar pdf (Pagina 105)

12-3

Cisco NAC Guest Server Installation and Configuration Guide

OL-15986-01

Chapter 12 Replication and High Availability

Configuring Provisioning

When the Cisco NAC Guest Server provisions accounts in other systems, such as the Clean Access

Manager, only one of the Guest Servers should be performing the provisioning at any one time.

One Cisco NAC Guest Server should be defined as the primary and the other as the secondary. The server

set to primary will perform the provisioning by default. If a server is set to secondary it will check the

status of the primary server, if it fails to contact the primary server three times then it will perform the

provisioning. This process happens every minute when the provisioning service runs.

Step 1 From the administration interface select Authentication > Replication Settings from the left hand menu

(

Figure 12-2).

Figure 12-2 Configuring Provisioning Order

Step 2 Select the Provisioning to be Primary if you want this server to perform the provisioning under normal

conditions. Select Secondary if you want this server to only perform provisioning if the Primary cannot

be contacted.

Step 3 Click the Save Settings button.

Note Only one of the servers should be set to Primary otherwise you may get errors when creating or deleting

accounts twice.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 133 134

Sin comentarios

Cisco Systems OL-15986-01 Manual de usuario Pagina 105