Cisco Systems OL-16066-01 Manual de usuario descargar pdf (Pagina 134)

Appendix K Router Platform User Interface Reference

VTY Policy Page

K-134

User Guide for Cisco Security Manager 3.2

OL-16066-01

Exec Timeout The amount of time (in seconds) that the EXEC command interpreter waits

to detect user input on the line. If no input is detected, the line is

disconnected. Valid values range from 0 to 2147483. The default is 600 (10

minutes). Setting the value to 0 disables the timeout.

Note Although the timeout is defined in seconds, it appears in the CLI in

the format [mm ss].

Input Protocols The protocols that you can use for incoming connections on this line:

• All—All supported protocols are permitted. Supported protocols

include LAT, MOP, NASI, PAD, rlogin, SSH, Telnet, and V.120.

• None—No protocols are permitted. This makes the port unusable by

incoming SSH, Telnet, and rlogin connections.

Note Setting the input protocols setting to None might prevent Security

Manager from connecting to the device after deployment. The device

can still be managed using SSL, if SSL is enabled in the HTTP

policy. See HTTP Page—Setup Tab, page K-111.

• Protocol—Enables one or more of the following protocols:

–

SSH—Secure Shell protocol.

–

Telnet—Standard TCP/IP terminal emulation protocol.

–

rlogin—UNIX rlogin protocol.

Note SSH and rlogin require that you configure AAA authentication. See

VTY Line Dialog Box—Authentication Tab, page K-136.

Note Not all IOS Software Versions support rlogin as an input protocol.

Table K-58 VTY Line Dialog Box—Setup Tab (Continued)

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 267 268

Sin comentarios

Cisco Systems OL-16066-01 Manual de usuario Pagina 134