Cisco Systems 10200 Manual de usuario Pagina 105

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 214
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 104
5-29
Cisco BTS 10200 Softswitch Operations and Maintenance Guide, Release 6.0.x
OL-16000-07
Chapter 5 Managing External Resources
Provisioning the GigE Interface
shut
no shut
Step 5 Save the switch configuration.
Step 6 Reboot the Cisco BTS 10200 host using the shutdown -g0 -y -i6 command. We recommend that you
execute the shutdown command using the console port to avoid loss of connectivity during the reboot.
After the reboot, all the targeted Cisco BTS 10200 applications should automatically restart and go into
standby state.
Step 7 Verify interface speed and duplex mode by executing the following command on the host:
dladm show-dev
Example output:
ca102> dladm show-dev
/jointfilesconvert/83355/bge0 link: up speed: 1000 Mbps duplex: full
/jointfilesconvert/83355/bge1 link: up speed: 1000 Mbps duplex: full
/jointfilesconvert/83355/bge2 link: up speed: 1000 Mbps duplex: full
/jointfilesconvert/83355/bge3 link: up speed: 1000 Mbps duplex: full
Step 8 Repeat for the other UNIX hosts in the Cisco BTS 10200 system.
Vista de pagina 104
1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 213 214

Comentarios a estos manuales

Sin comentarios