Cisco Systems 15327 Manual de usuario descargar pdf (Pagina 181)

100

101

11-23

Ethernet Card Software Feature and Configuration Guide, R7.2

January 2009

Chapter 11 Configuring Networking Protocols

Configuring EIGRP

Use the no forms of these commands to disable the feature or return the setting to the default value.

Example 11-8 shows the output for the show ip protocols privileged EXEC command.

Example 11-8 show ip protocols privileged EXEC Command Output (for EIGRP)

Router# show ip protocols

Routing Protocol is "eigrp 1"

Outgoing update filter list for all interfaces is not set

Incoming update filter list for all interfaces is not set

Default networks flagged in outgoing updates

Default networks accepted from incoming updates

EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0

EIGRP maximum hopcount 100

EIGRP maximum metric variance 1

Redistributing: eigrp 1

Automatic network summarization is in effect

Automatic address summarization:

192.168.3.0/24 for POS0

192.168.2.0/24 for FastEthernet0

Maximum path: 4

Routing for Networks:

192.168.2.0

192.168.3.0

Routing Information Sources:

Gateway Distance Last Update

192.168.2.1 90 00:03:16

Distance: internal 90 external 170

EIGRP Interface Mode Commands

Other optional EIGRP parameters can be configured on an interface basis.

Beginning in privileged EXEC mode, follow these steps:

Step 6

Router(config)# offset list

[{

access-list-number

name

}] { in |

out }

offset

[

type-number

]

(Optional) Applies an offset list to routing metrics to increase

incoming and outgoing metrics to routes learned through

EIGRP. You can limit the offset list with an access list or an

interface.

Step 7

Router(config)# no auto-summary

(Optional) Disables automatic summarization of subnet

routes into network-level routes.

Step 8

Router(config)# ip summary-address

eigrp

autonomous-system-number

address-mask

(Optional) Configures a summary aggregate.

Step 9

Router(config)# end

Returns to privileged EXEC mode.

Step 10

Router# show ip protocols

Verifies your entries.

Step 11

Router# copy running-config

startup-config

(Optional) Saves your entries in the configuration file.

Command Purpose

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 583 584

Comentarios a estos manuales

Sin comentarios

Cisco Systems 15327 Manual de usuario Pagina 181

Comentarios a estos manuales

Relacionado con productos y manuales para Software Cisco Systems 15327