
3-6
Administrator Guide for Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
OL-6571-02
Chapter 3 Configuring Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
How to Configure Cisco Unified MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
Step 4 To accept the settings, click Submit.
Step 5 Restart the IP-gateway server.
Verifying MeetingPlace H.323/SIP IP Gateway Software Release 5.2.1
Configuration
Step 1 To verify that Release 5.2.1 services are running, choose Start > Settings > Control Panel from the
IP-gateway server; then, select Services.
Step 2 Make sure that the following services are running:
• Cisco Unified MeetingPlace Gateway SIM
• Cisco Unified MeetingPlace IP Gateway
Step 3 To verify that the IP-gateway server is logging in, telnet to the Cisco Unified MeetingPlace Audio Server
system.
Step 4 To verify that the IP-gateway server status is OK, enter gwstatus.
Note It can take up to five minutes for gwstatus to update; therefore, any recent changes to the gateway may
not be reflected.
Step 5 Verify that you can access the Cisco Unified MeetingPlace Audio Server system by using a Cisco IP
Phone.
Step 6 Verify that you can access Cisco Unified MeetingPlace Audio Server system by using a PSTN phone.
H.323 Settings
Enabled Yes
E.164 Address Dialable number for the MeetingPlace H.323/SIP IPGW
H.323 ID MeetingPlace
Gateway Port 1720
Gatekeeper Address IP address of the H.323 Gatekeeper
Gatekeeper Port 1719
Use Gatekeeper Yes
Table 3-4 Release 5.2.1 Configuration Settings for Use With an H.323 Gatekeeper
Field Name Setting
Comentarios a estos manuales