Cisco Systems OL-15491-01 Manual de usuario descargar pdf (Pagina 215)

A-215

Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide

OL-15491-01

Appendix A CSG2 Command Reference

reauthorization timeout

To specify the CSG2 reauthorization timeout, use the reauthorization timeout command in CSG2

service configuration mode. To restore the default setting, use the no form of this command.

reauthorization timeout [initial initial-timeout] [maximum maximum-timeout]

no reauthorization timeout

Syntax Description

Defaults The default initial reauthorization timeout is 4 seconds.

The default maximum reauthorization timeout is 60 seconds.

Command Modes CSG2 service configuration

Command History

Usage Guidelines The quota server can override these settings.

For every quota grant of zero, the reauthorization time doubles, until the maximum timeout is reached.

For example, if the initial timeout is set to 30 seconds, and the maximum timeout is set to 250 seconds,

the reauthorization times (assuming quota grants of zero) would be:

• 30 seconds

• 60 seconds

• 120 seconds

• 240 seconds

• 250 seconds

And so on.

initial initial-timeout (Optional) Initial timeout, in seconds, for reauthorization after a

quota grant of zero. The range is from 1 to 3600 seconds. The

default is 4.

The value specified for must be less than or equal to the value

specified for maximum maximum-timeout.

maximum maximum-timeout (Optional) Maximum timeout, in seconds, for reauthorization

after a quota grant of zero. The range is from 1 to 3600 seconds.

The default is 60.

Release Modification

12.4(11)MD This command was introduced.

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 255 256

Sin comentarios

Cisco Systems OL-15491-01 Manual de usuario Pagina 215