Cisco Systems OL-15491-01 Manual de usuario descargar pdf (Pagina 88)

A-88

Cisco Content Services Gateway - 2nd Generation Release 2.0 Installation and Configuration Guide

OL-15491-01

Appendix A CSG2 Command Reference

ip csg psd drain delay

To define the delay interval, in seconds, before draining packets from the Cisco Persistent Storage

Device (PSD) when the Billing Mediation Agent (BMA) becomes active, use the ip csg psd drain delay

command in global configuration mode. To delete the drain delay interval, use the no form of this

command.

ip csg psd drain delay number-of-seconds

no ip csg psd drain delay

Syntax Description

Defaults The default value is 1 second.

Command Modes Global configuration

Command History

Usage Guidelines The CSG2 can buffer GTP’ messages in the Cisco Persistent Storage Device (PSD), if so configured.

(For more information, see the “Configuring PSD Support” section on page 7-1.) By default, the CSG2

limits the rate at which GTP’ messages are read from the PSD to 500 packets/second. However, you can

use the ip csg psd drain delay command to change that rate. For example, specifying an interval of

2 seconds yields a rate of 250 packets/second (500 packets/2 seconds).

Examples The following example shows how to specify a PSD drain delay interval of 2 seconds:

ip csg psd drain delay 2

Related Commands

number-of-seconds Delay interval, in seconds, before draining packets from the PSD. The range

is 0 to 3. The default value is 1. A value of 0 means no delay.

Release Modification

12.4(11)MD This command was introduced.

Command Description

ip csg psd Configures a Cisco Persistent Storage Device (PSD).

ip csg psd drain packet Defines the number of packets to be drained from the Cisco

Persistent Storage Device (PSD) per drain delay interval when the

Billing Mediation Agent (BMA) becomes active.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 255 256

Sin comentarios

Cisco Systems OL-15491-01 Manual de usuario Pagina 88