Cisco Systems CGS252016S8PC Manual de usuario descargar pdf (Pagina 85)

C-3

Cisco CGS 2520 Hardware Installation Guide

78-19377-02

Appendix C Configuring the Switch with the CLI Setup Program

Accessing the CLI Through the Console Port

USB Console Port

Step 1 If you are connecting the switch USB console port to a Windows-based PC for the first time, install a

USB driver. See Figure C-2.

• Installing the Cisco Microsoft Windows XP USB Driver, page C-4

• Installing the Cisco Microsoft Windows 2000 USB Driver, page C-4

• Installing the Cisco Microsoft Windows Vista USB Driver, page C-5

Figure C-2 Connecting the USB Console Cable

Step 2

Connect an USB cable to the PC USB port. Connect the other end of the cable to the switch mini-B

(5-pin-connector) USB console port (see Figure C-2).

Step 3 To identify the COM port assigned to the USB console port:

Choose Start > Control Panel > Systems

Click the Hardware tab and choose Device Manager. Expand the Ports section. The assigned COM

port appears in parenthesis at the end of the line with this entry: Cisco USB System Management

Console.

Step 4 Start the terminal-emulation program on the PC or the terminal. The program, frequently a PC

application such as HyperTerminal or ProcommPlus, makes communication possible between the switch

and your PC or terminal.

1 USB console port 3 USB port on the PC

2 USB cable

Cisco CGS 2520

207240

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 93 94

Sin comentarios

Cisco Systems CGS252016S8PC Manual de usuario Pagina 85