Cisco Systems IEM30004PC Manual de instalación descargar pdf (Pagina 124)

B-34

Cisco IE 3000 Switch Hardware Installation Guide

OL-13017-01

Appendix B Installation In a Hazardous Environment

Installing the Switch

Note The 19-inch rack adapter is not intended for application in an industrial environment and therefore it will

not meet the environmental performance specifications for the Cisco IE 3000 switch.

To install the switch in a rack, follow these steps:

Step 1 Use the four Phillips machine screws to securely attach the brackets to the rack. See Figure B-25.

Figure B-25 Installing the DIN Rail on the Rack

Step 2 Follow the steps described in the “Installing the Switch on a DIN Rail” section on page B-27.

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special

precautions to ensure that the system remains stable. The following guidelines are provided to

ensure your safety:

• This unit should be mounted at the bottom of the rack if it is the only unit in the rack.

• When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest

component at the bottom of the rack.

• If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in

the rack.

Statement 1006

201849

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 169 170

Sin comentarios

Cisco Systems IEM30004PC Manual de instalación Pagina 124