Cisco Systems IEM30004PC Manual de instalación descargar pdf (Pagina 41)

2-15

Cisco IE 3000 Switch Hardware Installation Guide

OL-13017-01

Chapter 2 Switch Installation

Verifying Switch Operation

Figure 2-10 Crimping the Ring Terminal

Step 4 Slide the ground screw through the ring terminal.

Step 5 Insert the ground screw into the functional ground screw opening on the front panel.

Step 6 Use a ratcheting torque screwdriver to tighten the ground screw and ring terminal lug to the switch front

panel to 8.5 in-lb. The torque should not exceed 8.5 in-lb. See

Figure 2-11.

Figure 2-11 Torquing Ground-Lug Screws

Step 7 Attach the other end of the ground wire to a grounded bare metal surface, such as a ground bus, a

grounded DIN rail, or a grounded bare rack.

76666

1 Ground cable

201696

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 169 170

Sin comentarios

Cisco Systems IEM30004PC Manual de instalación Pagina 41