Cisco Systems SMNMADPTR Manual de usuario descargar pdf (Pagina 22)

Cisco Branch Routers Series Network Analysis Module (NME-NAM-120S) Installation and Configuration Note, 4.0

OL-14942-02

Configuring the NME-NAM-120S for Management

4. ip unnumber <interface> <number>

5. no shutdown

6. service-module ip address <NAM-Address> <subnetmask>

7. service-module ip default-gateway <NAM-Default-Gateway-Address>

8. exit

9. ip route <NAM-Address> 255.255.255.255 integrated-service-engine slot/0

10. end

DETAILED STEPS

Command or Action Purpose

Step 1

enable

Enter IOS exec mode.

Step 2

configure terminal

Enter IOS configuration from terminal

mode.

Step 3

interface integrated-service-engine slot/0

Enter IOS interface configuration mode

for the integrated-service-engine

interface.

Step 4

ip unnumber <interface> <number>

Example:

Router (config-if)# ip unnumbered gigabitethernet 0/1

Borrow the address that was set at

<interface>. In the example, interface

integrated-service-engine 1/0 borrows

the address set in gigabitethernet0/1

interface.

Step 5

no shutdown

Enable the integrated-service-engine

interface.

Step 6

service-module ip address <NAM-Address> <subnetmask>

Router (config-if)# service-module ip address 209.165.200.226

255.255.255.224

Set <NAM-Address> to the NAM

Internal interface.

Step 7

service-module ip default-gateway <NAM-Default-Gateway-Address>

Example:

Router (config-if)# service-module ip default-gateway

209.165.200.225

Setup the NAM default gateway

address.

Step 8

exit

Exit from the router interface

configuration mode to the router global

configuration mode.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 57 58

Comentarios a estos manuales

Sin comentarios

Cisco Systems SMNMADPTR Manual de usuario Pagina 22

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco Systems SMNMADPTR