Cisco Systems XR 12410 Manual de instalación descargar pdf (Pagina 174)

Chapter 5 Maintaining the Router

Removing and Replacing the Blower Module

5-10

Cisco XR 12410 Router Installation Guide

OL-13832-01

Step 2 Install the new blower module into the chassis (Figure 5-6):

a. Lift the blower module (with two hands) and slide it halfway into the module

bay.

b. Slowly push the blower module into the chassis until it mates with the

backplane connector at the back of the module bay.

Caution To prevent damage to the connectors, do not use excessive force when inserting

the blower module into the chassis.

c. Tighten the captive screws on the blower module to secure it to the chassis.

• The (green) OK status indicator on the front of the blower module goes on. If

the OK indicator does not light, see the

“Troubleshooting the Blower Module

Installation” section on page 5-11.

Figure 5-6 Installing the Blower Module

122100

DOWN

LOOP RA LA

CDHNT CD

DOWN

LOOP RA LA

CDHNT CD

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 229 230

Sin comentarios

Cisco Systems XR 12410 Manual de instalación Pagina 174