Cisco Systems 4xGBE Guía de usuario Pagina 16

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 152
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 15
Chapter 1 Introduction
SCE Platform Management Interfaces
SCE 2000 4xGBE Installation and Configuration Guide
1-2 OL-7824-02
SCE Platform Management Interfaces
You can manage the SCE 2000 platform through either of its management interfaces, CLI or
SNMP. Both these interfaces provide management access to the same database of the SCE 2000
platform; any configuration changes made through one interface are also reflected through the
other interface.
CLI (Command Line Interface). The CLI is accessible through the Console port or through a
Telnet connection. The CLI is the interface described throughout this manual. Command Line
Interface further discusses the CLI.
SNMP (Simple Network Management Protocol). You can use SNMP as an interface for
monitoring the variables as defined in the MIB-II and Cisco’s propriety MIB specifications.
For information on enabling SNMP, see SNMP Interface
Vista de pagina 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 151 152

Comentarios a estos manuales

Sin comentarios