Cisco Systems 4xGBE Guía de usuario Pagina 63

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 152
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 62
Chapter 4 Installation and Maintenance
Fan Module Overview
SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-02 4-27
Step 3 Gently, but firmly, slide the module into the chassis until its faceplate is flush with the
chassis rear panel.
Figure 4-17: Inserting the Fan Module
Warning
When inserting a fan module into the SCE 2000 platform, do not use unnecessary force; slamming the
fan module into the chassis can damage the connectors on the rear of the module.
Step 4 Seat the fan module in the SCE 2000 platform by tightening the two captive installation
screws with a 1/4-inch flat-blade screwdriver.
Note
The fan module is not fully seated until you tighten the installation screws on the faceplate.
This completes the procedures for replacing a fan module in a SCE 2000 platform.
Vista de pagina 62
1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 151 152

Comentarios a estos manuales

Sin comentarios