Cisco Systems MGX 8850 Guía de usuario descargar pdf (Pagina 393)

100

101

5-99

Cisco MGX 8850 Routing Switch Command Reference

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Chapter 5 PNNI Commands

dsppnni-ptse

remote node id The node ID of the remote node. For a description of the node ID,

see the description for addpnni-node or cnfpnni-node.

remote port id The logical PNNI identifier on the remote interface. For more

details, see PNNI Format.

Range: 1–2147483648

local port id The logical PNNI identifier on the local interface. For more details,

see PNNI Format.

Range: 1–2147483648

aggregation token See the description of the cnfpnni-intf command for a definition of

an aggregation token. The current release does not support link

aggregation.

Range: 1–32

Uplink IG Parameters

Note The current release does not support uplinks.

type The ASCII string that indicates the type of up link IG parameters.

length A 16-bit number.

flags A string of 8-bit flags.

remote higher level node id The PNNI node identifier assigned to a PNNI node.

common pg id The peer group ID (of length level) that assigned to the PNNI

common PG. This peer group is the local peer group.

Default: Figure 5-1 shows the factory-set default.

local port id The logical PNNI identifier on the interface. For more details, see

PNNI Format.

Range: 1–2147483648

aggregation token Range: 1–2147483648.

upnode ATM address The ATM address of the PNNI uplink node. The upnode ATM

address is a 20-byte, hexadecimal string. The upnode is the node at

the other end of the uplink. It is the neighboring peer of the ancestor

of the node from which the uplink originates.

Default: none

1 2 ... 388 389 390 391 392 393 394 395 396 397 398 ... 785 786

Comentarios a estos manuales

Sin comentarios

Cisco Systems MGX 8850 Guía de usuario Pagina 393

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco Systems MGX 8850