Cisco Systems MGX 8850 Guía de usuario descargar pdf (Pagina 451)

100

101

6-33

Cisco MGX 8850 Routing Switch Command Reference

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Chapter 6 Logical Node, Port, and Signaling Commands

cnfpnportacc

Configure Port Access—associates an ATM filter set with a port.

The cnfpnportacc command lets you associate an ATM filter set with a port (after you create the filter

set with addfltset). You must specify at least one filter set if you use this command.

Cards on Which This Command Runs

PXM45

Syntax

cnfpnportacc <portid> [-in in-filter-name] [-out out-filter-name]

Syntax Description

Related Commands

delpnportacc, addfltset

Attributes

portid The portid is the PNNI physical port. The format is [shelf.]slot[:subslot].port[:subport]. See

also PNNI Format, page 6-4.

-in in-filter-name: the name of the filter set that applies to SETUP messages that arrive at the port.

-out out-filter-name: the name of the filter set that applies to SETUP messages that leave the port.

Log: log State: active Privilege: GROUP1

1 2 ... 446 447 448 449 450 451 452 453 454 455 456 ... 785 786

Comentarios a estos manuales

Sin comentarios

Cisco Systems MGX 8850 Guía de usuario Pagina 451

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco Systems MGX 8850