Cisco Systems MGX 8850 Guía de usuario descargar pdf (Pagina 657)

100

101

9-39

Cisco MGX 8850 Routing Switch Command Reference

Release 2.0, Part Number 78-10467-04 Rev C0, October 2001

Chapter 9 Troubleshooting Commands

cnfxbarerrthresh

Usage Guidelines for cnfxbarerrthresh

You can change the threshold for only one type of error at a time. Also, you must enter all parameters

of the threshold whether or not you change them. For example, if you want to change only the duration

of errored milliseconds, you must include the existing parameters. Therefore, you probably need to

execute dspxbarerrthresh before cnfxbarerrthresh.

Related Commands

dspxbarerrthresh

Attributes

Example

For Loss of Sync, set the clear count for critical alarms to 200.

pop20two.7.PXM.a > cnfxbarerrthresh 1 2000 2 200 301

In the sequence of command and arguments, the only value that differs from the existing threshold is the

clear count of 200. If the operation is successful, the system displays the error threshold for the type of

error you specified—Loss of Sync in this example.

pop20two System Rev: 02.01 Dec. 05, 2000 02:29:17 GMT

MGX8850 Node Alarm: MAJOR

CROSSBAR ERROR CONFIGURATION

Thresh -- MINOR -- -- MAJOR -- -- CRITICAL --

Device Error Time Clear Alarm Clear Alarm Clear Alarm

Type (msec) Count Count Count Count Count Count

-------------------- ------ ----- ----- ----- ----- ----- -----

LossOfSync 2000 0 3 4 15 200 301

almcnt The number of errors for an alarm severity above which the alarm goes to the next

highest severity.

Log: log State: active Privilege: SERVICE_GP

1 2 ... 652 653 654 655 656 657 658 659 660 661 662 ... 785 786

Comentarios a estos manuales

Sin comentarios

Cisco Systems MGX 8850 Guía de usuario Pagina 657

Comentarios a estos manuales

Relacionado con productos y manuales para Redes Cisco Systems MGX 8850