Cisco Systems WSC2960X48TDL Manual de usuario descargar pdf (Pagina 42)

PurposeCommand or Action

Returns to privileged EXEC mode.end

Example:

Switch(config-if)# end

Step 4

Verifies the interface flow control settings.

show interfaces interface-id

Example:

Switch# show interfaces gigabitethernet1/0/1

Step 5

Configuring SVI Autostate Exclude

SUMMARY STEPS

configure terminal

interface interface-id

switchport autostate exclude

end

show running config interface interface-id

DETAILED STEPS

PurposeCommand or Action

Enters global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

Specifies a Layer 2 interface (physical port or port channel),

and enter interface configuration mode.

interface interface-id

Example:

Switch(config)# interface gigabitethernet1/0/2

Step 2

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

30 OL-29034-01

Configuring Interface Characteristics

Configuring SVI Autostate Exclude

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 107 108

Sin comentarios

Cisco Systems WSC2960X48TDL Manual de usuario Pagina 42