Cisco Systems WSC2960X48TDL Manual de usuario Pagina 77

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 108
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 76
PurposeCommand or Action
Returns to global configuration mode.exit
Example:
Switch(config-civic)# exit
Step 3
Specifies the interface on which you are configuring the location
information, and enter interface configuration mode.
interface interface-id
Example:
Switch (config)# interface gigabitethernet2/0/1
Step 4
Enters location information for an interface:
location {additional-location-information word |
civic-location-id {id | host} | elin-location-id id |
Step 5
additional-location-informationSpecifies additional
information for a location or place.
custom-location-id {id | host} | geo-location-id {id |
host} }
Example:
Switch(config-if)# location elin-location-id 1
civic-location-idSpecifies global civic location
information for an interface.
elin-location-idSpecifies emergency location
information for an interface.
custom-location-idSpecifies custom location
information for an interface.
geo-location-idSpecifies geo-spatial location
information for an interface.
hostSpecifies the host location identifier.
wordSpecifies a word or phrase with additional location
information.
idSpecifies the ID for the civic, ELIN, custom, or geo
location. The ID range is 1 to 4095.
Returns to privileged EXEC mode.end
Example:
Switch(config-if)# end
Step 6
Verifies the configuration.Use one of the following:
Step 7
show location admin-tag string
show location civic-location identifier id
show location elin-location identifier id
Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29034-01 65
Configuring LLDP, LLDP-MED, and Wired Location Service
Configuring Location TLV and Wired Location Service
Vista de pagina 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 107 108

Comentarios a estos manuales

Sin comentarios