Cisco Systems WSC2960X48TDL Manual de usuario descargar pdf (Pagina 45)

DETAILED STEPS

PurposeCommand or Action

Enters the global configuration mode.configure terminal

Example:

Switch# configure terminal

Step 1

Configures the console and enters line configuration mode.line console 0

Example:

Switch(config)# line console 0

Step 2

Configures the console media type to be only RJ-45 port. If

you do not enter this command and both types are connected,

the USB port is used by default.

media-type rj45

Example:

Switch(config-line)# media-type rj45

Step 3

Returns to privileged EXEC mode.end

Example:

Switch(config)# end

Step 4

Configuring the USB Inactivity Timeout

The configurable inactivity timeout reactivates the RJ-45 console port if the USB console port is activated

but no input activity occurs on it for a specified time period. When the USB console port is deactivated due

to a timeout, you can restore its operation by disconnecting and reconnecting the USB cable.

The configured inactivity timeout applies to all switches in a stack. However, a timeout on one switch

does not cause a timeout on other switches in the stack.

Note

Beginning in privileged EXEC mode, follow these steps to configure an inactivity timeout.

SUMMARY STEPS

configure terminal

line console 0

usb-inactivity-timeout timeout-minutes

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 33

Configuring Interface Characteristics

Configuring the USB Inactivity Timeout

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 107 108

Sin comentarios

Cisco Systems WSC2960X48TDL Manual de usuario Pagina 45