Cisco Systems WSC2960X48TDL Manual de usuario descargar pdf (Pagina 55)

DETAILED STEPS

PurposeCommand or Action

Enters global configuration modeconfigure terminal

Example:

Switch# configure terminal

Step 1

Specifies the physical interface to be configured, and enter

interface configuration mode.

interface interface-id

Example:

Switch(config)# interface gigabitethernet1/0/1

Step 2

Configures the interface to autonegotiate speed with the

connected device.

speed auto

Example:

Switch(config-if)# speed auto

Step 3

Configures the interface to autonegotiate duplex mode

with the connected device.

duplex auto

Example:

Switch(config-if)# duplex auto

Step 4

Enables auto-MDIX on the interface.mdix auto

Example:

Switch(config-if)# mdix auto

Step 5

Returns to privileged EXEC mode.end

Example:

Switch(config-if)# end

Step 6

Monitoring Auto-MDIX

PurposeCommand

Catalyst 2960-X Switch Interface and Hardware Component Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29034-01 43

Configuring Auto-MDIX

Monitoring Auto-MDIX

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 107 108

Sin comentarios

Cisco Systems WSC2960X48TDL Manual de usuario Pagina 55