Cisco Systems PGW 2200 Guía de usuario descargar pdf (Pagina 191)

100

101

4-9

Cisco PGW 2200 Softswitch Release 9.8 Software Installation and Configuration Guide

OL-18083-01

Chapter 4 Configuring the Cisco PGW 2200 Softswitch Software

Initial Cisco PGW 2200 Softswitch Software Configuration

A dialog box displays, warning that the MGC Environment Configuration Tool is for initial system

configuration only.

Note To run the MGC Environment Configuration Tool in detail mode, enter the command MGC_Setup

-detail.

Step 2 Click Ye s to continue running the XECfg program.

The MGC Environment Configuration Tool screen expands to provide information from the

XECfgParm.dat file. Figure 4-1 shows the MGC Environment Configuration Tool screen.

Figure 4-1 MGC Environment Configuration Tool

Table 4-5 explains the startup parameters listed in the MGC Environment Configuration Tool.

Table 4-5 MGC Environment Configuration Tool Startup Parameters

Field Usage

MGC Type Indicates whether the Cisco PGW 2200 Softswitch connection type.

SWITCHED-MGC specifies a dynamic connection such as a trunk group;

NAILED-UP specifies a permanent connection such as a sigpath.

Operational Mode Indicates the whether the Cisco PGW 2200 Softswitch is operating as a

stand-alone system or in a fault-tolerant configuration with an active and

standby Cisco PGW 2200 Softswitch.

Note If you select Active/Standby, you must provide a peer IP address.

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 435 436

Comentarios a estos manuales

Sin comentarios

Cisco Systems PGW 2200 Guía de usuario Pagina 191

Comentarios a estos manuales

Relacionado con productos y manuales para Software Cisco Systems PGW 2200